Ring Tone; Data/Fax; Key Beep (Menu 3-2); Alert (Menu 3-3) - Samsung SAM911 User Manual

Ring Tone

This option allows you to select the required ringing tone. You
can choose among 23 different tones or melodies. Each time
you select a tone, it sounds for a few seconds.

Data/Fax

This option allows you to be alerted with a distinct ringing
tone when you are faxed or received a data through the phone
(network dependent). You can choose between 23 different
tones or melodies. Each time you select a tone, it is played for
a few seconds.
Key Beep
This option allows you to adjust the tone volume that the
keypad generates when you press a key.
You can also use or
to adjust key volume in the idle mode.
Alert
Minute Beep
With this menu option set to ON, the phone sounds an alert
10 seconds before each elapsed minute to remind you of the
length of the current call.
Service Area
With this menu option set to ON, the phone beeps when you
exit service area or when you return to a service area.
40
Sounds
Menu 3-2
key on the left side of the phone
Menu 3-3
Alarm
The option allows you to set the alarm to ring at a specific
time.
To set the alarm, proceed as follows.
1. Select Set option.
2. Choose the alarm frequency option, and press
Daily: the alarm rings every day at the same time.
One Time: the alarm rings only once and is then
deactivated.
3. Enter the required time.
4. Press key.
OK/
To stop the alarm when it rings, simply open/close the phone
or press any key.
To deactivate the alarm, select Release option, then
press key.
OK/

Differential Ring

This option allows you to designate a unique ring to signal an
incoming call by a stored caller number.
You can specify up to 5 callers and select a unique ring tone
for each caller from 23 different tones and melodies.
Menu 3-4
key.
OK/
Menu 3-5
41
Sounds