Sound Settings; Ring Tone (Menu 3.1); Ring Volume (Menu 3.2); Alert Type (Menu 3.3) - Samsung SGH-X426 Manual

Sound Settings

You can use the Sound Settings feature to
customize various settings, such as the:
• ring melody, volume and type.
• sounds made when you press a key, receive a
message, open/close the folder or switch your
phone on/off.
• alert tone made every minute during a call, when
you make an error or when your call is connected
to the system.
Note: When the phone is in Silent mode (see
page 27), you cannot change the sound
settings.
Ring Tone
(Menu 3.1)
This menu allows you to select a ring melody.
You can choose between many different melodies.
Each time you select a melody, it plays for a few
seconds. If you have downloaded sounds from the
Internet, you can use them in this menu.
Ring Volume
(Menu 3.2)
This menu allows you to adjust the ring volume to
one of five levels.
Use the Up and Down keys or the Volume keys on
the left side of the phone to increase or decrease
the volume.
76
Alert Type
(Menu 3.3)
This menu allows you to specify how you are to be
informed of incoming calls.
The following options are available:
Light Only: the service light flashes the phone
neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected in the Ring Tone menu (Menu 3.1); see
page 76.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone
(Menu 3.4)
This menu allows you to select the tone that the
phone sounds when you press a key.
To turn off the sound, select Off.
Sound Settings
77