Table of Contents
Advertisement
Chapter 4: Preparing for Operation
4. Preparing for Operation
4.1 Unpacking the Instrument
1. Keep the original packing material in case you need to return the unit.
2. Unpack the Instrument and make sure you have all the items listed in Section
2.3.
3. Check for damage in transit. If there is damage, do not attempt to operate the
instrument or repair it without authorization. Doing so can cause further
damage and you may lose your warranty qualification.
4.2 Power Supply
A battery indicator and a power plug icon are on the instrument's screen. When
you use the 6-VDC charger, there is no battery indicator on the screen. When you
do not connect the 6-VDC charger, the adapter indicator will disappear on the
screen.
When you use the battery, the battery indicator on the screen will show the
remaining charge. An empty battery indicator means the power is almost out.
When the battery charge is too low to supply the necessary power, the
instrument will automatically switch off after several beeps. Change or recharge
the batteries.
Page 10
Figure 4-1. Power plug indicator.
Figure 4-2. Battery indicator.
Figure 4-3. Battery indicator is full.
Figure 4-4. Battery indicator is empty.
724-746-5500 | blackbox.com
Advertisement
Table of Contents
