Operation - Black Box Multi Quick Check RJ-11 Manual

MULTI QUICK CHECK

Operation

Patch Cord Test
Slide the power switch on the remote unit to the left.
The red LED will blink, indicating that the power is on.
Insert one end of an 8-position (RJ-45) patch cord into
the master's RJ-45 jack. Insert the other end of the patch
cord into the remote's RJ-45 jack. Green LEDs on the
master unit should blink in a left-to-right sequence as
shown in Figure 8. Yellow lights, unlit lights, or out-of-
sequence lights indicate improper wiring.
10