Table of Contents
Advertisement
Saving a Phone Number
Your Sprint PCS Vision Phone can store up to 299 Contact numbers.
Contact entries can store up to a total of six phone numbers, and
each entry's name can contain up to 20 characters. (For more
information, see Section 2G: Using Contacts on page 83.)
To save a number from standby mode:
1.
Enter a phone number and press
2.
Press
— or—
Highlight an existing entry and press
screen. Locate the desired contact and add the additional
number to the selected entry.
3.
Use your navigation key to select a label (Home, Work, Mobile,
Pager, Fax, or No Label) and press
4.
If adding a new entry, enter a name for the entry using the numeric
keys. Press
Alpha, Symbol, and Number. See "Entering Text" on page 30.)
5.
When finished entering the name, press
contact entry.
6.
Press
Finding a Phone Number
This feature allows you to search for phone numbers saved in your
contacts by entering the last digits of the phone number. When
searching, you must enter the digits in sequential order starting from
the last number. For example; if you have a number saved as
"555-555-1234", you can enter "1234" and a match will be found. If
you enter "5551", no match will be found since the numbers are not
the last digits.
To find a phone number:
1.
Enter one to four numbers of the last four digits of a phone
number, press
displayed.)
2.
Use your navigation key to display the desired entry.
3.
To dial the number, highlight it and press
Section 2A: Your Sprint PCS Vision Phone - The Basics
again for Add New Entry.
to select the desired entry method (T9 (English),
for Done to save the entry.
, and select Find. (A list of possible matches is
.
to launch the Find
.
to return to the
for Call.
26
Advertisement
Table of Contents
