Advertisement
Quick Links
Advertisement
Related Manuals for Hoover FloorMate Edge
Summary of Contents for Hoover FloorMate Edge
- Page 1 Floormate Edge User Guide HF86-FME-S...
-
Page 2: Table Of Contents
CONTENTS Contents Machine Overview General Safety Information Operation Maitenance FAQs Other Information Notes... -
Page 3: Machine Overview
MACHINE OVERVIEW Unit Handle Carry Handle On/Off Switch Recovery tank release button Recovery tank Clean water tank release button Clean water / Detergent tank Nozzle Nozzle release clips Squeegee Detergent trigger Handle lock Quick release cord hook Lower cord hook Wash / Dry selector pedal Handle release pedal Soft tread wheels... -
Page 4: General Safety Information
Not suitable for use on water sensitive flooring. 6. Only Hoover recommended tools and accessories should be used with this Floormate. 7. Don’t use this Floormate if it has been dropped, damaged, immersed in water or left outdoors. -
Page 5: Operation
Please remove any large objects or debris and it is advisable to then vacuum your hard floor prior to using your Floormate Edge. Important: Only use Hoover hard floors cleaning detergent. Using other detergents may cause excess foaming. Excessive foam will prevent the machine from working effectively. - Page 6 OPERATION Twist the tank cap into place Place the bottom of the Pour cleaning detergent to secure. Clean water tank onto the into tank. Top up tank to machine first and click the fill line with warm water top into place. (Max 40°C).
- Page 7 OPERATION Cleaning the filter After each use clean the water tank filter. Pull open the clean Rinse under water to remove debris (max. 40°C) and leave water tank lid, gently remove filter. for at least 24 hours or until fully dry before replacing in the machine.
-
Page 8: Maitenance
MAINTENANCE Using your machine and spinscrub brush In WASH mode slowly move the machine forward to arms length The machine may be moved squeezing the trigger to release the detergent. Release trigger by using the carry handle at and pull back the machine to pick up. the front of the machine. -
Page 9: Faqs
FAQs Why won’t my Floormate switch on? • Check the fuse in the plug. Always replace the fuse in the plug with a 13amp fuse. Why won’t my Floormate pick up? • Empty recovery tank, remove any debris from filter. If washing filter allow 24 hours to fully dry before refitting. •... -
Page 10: Other Information
OTHER INFORMATION Service & Help If you have queries or concerns about using your Hoover, please visit www.hoover.ae. Technical Specification Voltage: 220-240V ~50/60Hz Wattage: 750W Cord length: 6m Weight: 5.9 kg Subject to technical change without notice. Consumables Floor to Floor Detergent... -
Page 11: Notes
NOTES...