Maitenance - Hoover FloorMate Edge User Manual

7
MAINTENANCE
Using your machine and spinscrub brush
In WASH mode slowly move the machine forward to arms length
squeezing the trigger to release the detergent. Release trigger
and pull back the machine to pick up.
Cleaning the nozzle and spinscrub brush
Nozzle can be removed for easy
cleaning. Slide the two nozzle
release latches outwards.
Warning: Always remove the tanks before carrying out brush/nozzle maintenance.
Tip: The tanks should be emptied and cleaned after each use and before storage.
Remove nozzle by pulling
straight out and rinse under
running water to clean.
The machine may be moved
by using the carry handle at
the front of the machine.
Pull spinscrub brush bar out.
The brushes can be rinsed
under water to remove debris
(Max 40°C). To replace
spinscrub brushes press firmly
and lock into place then click
nozzle latches back into
place.