Faqs - Hoover FloorMate Edge User Manual

FAQs

8
Why won't my Floormate switch on?
• Check the fuse in the plug. Always replace the fuse in the plug with a 13amp fuse.
Why won't my Floormate pick up?
• Empty recovery tank, remove any debris from filter. If washing filter allow 24 hours to fully dry before refitting.
• The recovery tank has an automatic shut off to prevent the tank from overflowing. If this is activated, the machine
will not pick up and the sound of the motor will change. The recovery tank will need to be emptied.
• Make sure the recovery tank is locked into place
• Nozzle may not be locked into position
Why won't the water/detergent dispense?
• Clean water tank may not be locked in position.
• Clean water tank may be empty and need to be refilled.
• Mode selector switch is set to Dry mode, change to WASH
• Check the spinscrub brushes for blockages and clear
Why won't the brushes spin?
• Mode selector switch is set to PICK UP, change to WASH.
• Check the brushes for blockages and clear.
Warning: Always unplug the Floormate before performing maintenance/troubleshooting checks.