Chapter Ii: Installing Software - Robo 3D R1 Manual

CH II
Installing Software
So you've got your ROBO 3D unit put together- now what? Well the next step is to get the software you
need to work with your computer. We have included a copy of our software in the box that your printer
shipped in and it is also available on our website,
software is easily supported by Windows and Mac operating systems.

To install the ROBO 3D Printer software by MatterHackers, first locate the 2 GB micro SD
card and USB thumb drive adapter included in your tool kit.

Insert the micro SD card into the USB SD card adapter (2.1)

Insert the USB adapter with SD card into an available USB port on your computer. You will
be prompted to open the drive.

Within the "ROBO 3D PRINTER" folder you will see 3 files:
- Getting Started Video (robo3d_2014.mp4)
- Macintosh compatible software (.pkg file)
- Windows compatible software (.exe file)

Select the software that matches with your operating system and follow the onscreen
prompts for installation.
www.robo3d.com under the "Support" tab. This
(2.1)
3