Voice Command Settings - Samsung P O R T A B L E D U A L - B A N D SCH-R630 User Manual

• Check — Lets you check your phone's status (that is, network
coverage, signal strength, battery, and more in the same report),
voicemail, messages, missed calls, time, signal strength, battery,
volume, and phone number.
• Contacts — Lets you look up and display contact information for
any name stored in your Contacts list by saying the name. (For
more information, refer to "Finding a Contacts Entry" on
page 34.)
• Redial — Redials the last number dialed.
• Help — Shows a description of Voice Commands.
Note: Speaking clearly, say the command that you want to use. If, after a few
seconds, the device has not recognized a command, it prompts you to
repeat the command. If, after a few more seconds, it still has not
recognized a command, it tells you "Sorry, no match found," and
cancels voice recognition.
Voice Command Tips:
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
•
Voice-Activating Your Contacts List
When you first start Voice Service, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, Voice Service automatically reloads and voice-
activates the entire list.
79
Ending Calls Before Restarting the Voice Service Software
When you use Voice Service to make a call, you must end that
call before you can use Voice Service again.

Voice Command Settings

Confirm Choices
Voice Service uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
You can change the way that Voice Service responds to your
choices with name dialing, digit dialing, and contacts. To change
the way Voice Service responds to your choices, do the following:
From the Voice Service menu, tap Voice Command
1.
➔
Settings Confirm Choices the following options appear
in the display:
• Automatic — Voice Service displays a choice list only when it is
not sure if it has correctly recognized the name or number.
• Always Confirm — Voice Service always displays a choice list,
regardless that it is sure it recognizes the name or number.
• Never Confirm — Voice Service never displays a choice list.
Tap the Confirmation behavior you prefer.