Call Answer - Samsung P O R T A B L E D U A L - B A N D SCH-R630 User Manual

If the caller can be identified, the caller's number (or name if it's in your
•
Contacts) appears in the display.
If the caller cannot be identified, Call from unavailable #, Call from
•
restricted #, or no number appears in the display.
Tip: Assign pictures to Contacts entries. The entry's assigned picture
appears in the display when you receive a call from that entry. For more
information, refer to "Assigning a Picture to a Contacts Entry" on
page 37.
The phone continues to notify you of the call until one of the
following events occur:
You answer the call.
•
The calling party ends the call.
•
• The call is sent to voicemail.
Call Notification Features
Your phone notifies you of a call in a variety of ways.
• Eight ring volume settings: All Sounds Off, Alarm Only, Vibrate Only,
Low, Medium Low, Medium, Medium High, or High.
Different ring types or melodies to distinguish callers.
•
Name display with caller ID. (If the caller's name is programmed into
•
your Contacts).
Information about the last 90 each of incoming, missed, and outgoing
•
calls are automatically stored to a call log.
25
Set Call Ringer Volume
For more information, refer to "Adjust the Ringer" on page 19.

Call Answer

Select from two methods for answering calls. This option can be
changed in the Settings menu.
In Standby mode, tap Menu
1.
➔
Answer Options.
Tip: You can also carry out this procedure using the QWERTY keypad.
The following options appear in the display:
• Slide Open — Slide the phone open to answer an incoming call.
• Any Key — Pressing any key on either keypad, except
or tapping Quiet or Ignore & Msg answers a call.
• Auto w/Handsfree — Phone automatically answers incoming
calls when connected to a Bluetooth handsfree car kit.
Tap the desired method(s) for answering calls. A check
2.
mark appears in the box to the right of each option you
select. (You can select all three methods, if you wish.)
To de-select an option, tap it again. The check mark
3.
disappears.
➔ ➔
Settings Call Settings
or