Instructions rotating the Prins VSI injector rail
This is an instruction how to convert a "right" rail into a "left" injector rail
Tools :
Disassembly / assembly:
1. Unscrew both M8 (4) nuts.
2. Remove the strip (2).
3. Remove the injectors (10) with a rotating movement out of the fuel rail (1).
4. Rotate the rail (1) 180 degrees.
5. Mount the injectors (10) with a rotating movement into the fuel rail (1).
6. Mount the strip (2) on the injectors (10).
7. Tighten the strip (2) with two M8 nuts (4). Tightening moment 2.5 Nm.
Ring spanner size 13 mm
Torque spanner ( 0-3 Nm )
Copyright ©
Prins Autogassystemen B.V.
2013
Page 13