5
T E L E C O M
PROGRAMMABLE BUTTONS LED INDICATORS
The programmable buttons, [Transfer] button, [Hold] button, and [Speaker] button have LEDs that light red, green or amber when
it is being used. The following table summarises the functions of LEDs.
Function
External line or function is in use
New incoming call is ringing
A call is on hold
A held or transferred call is recalling to the phone
PHONE STATUS INDICATOR
The status indicator is located on the upper right section of the LCD panel. It shows the status of the phone as described in the table.
Status of Phone
Busy on call / Off-hook
Internal extension ring
External (C.O.) line ring
Transferred / held call recalling
Message waiting
Calling denied
USING FEATURE CODES
System features are programmed with default codes that you can dial to access the features. These are described in the relevant parts of
the guide. However, these codes may have been changed in programming; if so, you may find that a feature does not work as de-
scribed. In such cases, refer to your system administrator for the correct codes (or ask them to check with the installation technician
if they don't know what they are).
SELECTING PROGRAMMED FUNCTIONS
The most convenient way to select functions on your phone is to have them registered on the programmable buttons, so that you
simply press the required button. If a function is not programmed on a button, it can be selected on the LCD panel using the Scroll button
and soft buttons.
An advantage of using the soft buttons for functions is that the programmable buttons can be used to assign more buttons for di-
rect extension selection and speed dialling.
Button LED Status
LED is steady green.
LED is a fast flashing green
LED is a slow flashing green or red
LED is a slow flashing amber
Status Indicator
Steady red
Flashing red
Flashing green
Flashing amber
Flashing red
Fast flashing red