Scope Of Documentation - Tridonic DALI MSensor 02 Product Manual

&nbsp Scope of documentation
Validity
These operating instructions are valid for the DALI MSensor 02. For better distinction from previous versions the DALI
MSensor 02 carries imprints with the information "Version 02" or "Firmware version V2.00".
Notice
The DALI MSensor 02 behaves differently to previous versions (V1.5 and earlier). The DALI MSensor is
therefore only backward compatible to a limited extent.
Please pay attention to notes in the individual chapters!
For version V1.5 or earlier sensors: pay attention to the notes in the respective documentation!
The DALI MSensor 02 is configured in the masterCONFIGURATOR software (V2.02. or later). Using older
versions of the software to configure the DALI MSensor 02 will result in incorrect operation.
Please make sure you are using an up-to-date version of the masterCONFIGURATOR software.
TRIDONIC GmbH & Co KG is constantly striving to develop all its products. This means that there may be changes in form,
equipment and technology.
Claims cannot therefore be made on the basis of information, diagrams or descriptions in these instructions.
The latest version of these operating instructions is available on our home page at
http://www.tridonic.com/com/en/operating-instructions.asp
Version information
Editorial deadline: 24-02-2012 Version number: 1.0 Issue date: 24-02-2012
Copyright
This documentation may not be changed, expanded, copied or passed to third parties without the prior written agreement of
TRIDONIC GmbH & Co KG.
We are always open to comments, corrections and requests. Please send them to
Imprint
Tridonic GmbH & Co KG
Färbergasse 15
6851 Dornbirn
Austria
T +43 5572 395-0
F +43 5572 20176
www.tridonic.com
...
Documentation DALI MSensor 02 | 02-2012 | en
info@tridonic.com .
- 4 / 38 -