Britax Essentials Emblem User Manual page 22

BRITAX Child Safety, Inc.
8. Nest the end of the right
harness strap into the left.
9. Hook the harness straps
onto the yoke. Ensure that
the harness straps are not
twisted and that the ends
of the harness straps are
securely attached to the
yoke.
IMPORTANT: Store the
chest pads in a safe
location when not in use.
Replacing the Impact Absorbing Chest Pads
1. Loosen the harness.
a. Lift harness adjuster
lever.
b. Pull both harness
straps forward.
2. From the back of the
seat, unhook the harness
straps from the yoke.
3. Pull one harness strap
through the harness slot
to the front of the seat.
4. Route the harness strap
out of the comfort pad
and chest clip.
5. Reroute the harness strap
through the chest pad,
chest clip, and comfort
pad.
6. Repeat for other strap.
38
1b
1a
EMBLEM/ALLEGIANCE User Guide
7. Route the harness straps
through the seat to the
back. Ensure that the
harness straps pass
through the harness
adjuster.
8. Nest the end of the right
harness strap into the left.
9. Hook the harness straps
onto the yoke. Ensure that
the harness straps are not
twisted and that the ends
of the harness straps are
securely attached to the
yoke.
39