Table of Contents
Advertisement
Getting started
Installation options
Your telephone base is ready for tabletop use. If you want to mount
your telephone on a wall, follow the steps to connect the telephone
base with a standard dual-stud telephone wall-mounting plate. You
may need a professional to install the mounting plate.
Tabletop to wall-mount installation
1. Plug the power cord and telephone line into the telephone
base. If you are using a DSL filter, plug the other end of the
telephone line into the filter. Route the telephone line cord (or
DSL filter) through the wall-mount bracket hole.
2. Position the telephone base, as shown below. Insert the
extended tabs (marked A in the following illustration) of the
wall-mount bracket into the slots on the back of the telephone
base. Push the telephone base down until it is securely in place.
3. Plug the telephone line cord (or DSL filter) into the wall jack.
Plug the power adapter into a power outlet not controlled by a
wall switch.
4. Align the holes on the wall-mount bracket with the standard
wall plate and slide the wall-mount bracket down until it locks
securely. Bundle the telephone line cord and power adapter
cord neatly with twist ties.
1
3
2
4
11
Hide quick links:
Advertisement
Table of Contents
