Table of Contents
Advertisement
CHAPTER 2
PRODUCT FEATURES
2.1
Description
The MiniFlex
is a compact flexible AC current transformer composed of
®
a flexible sensor and an electronic module. The flexible sensor permits
measurements on conductors where standard clamp-on probes could not
be used. In particular, it can be installed in confined spaces, places where
access is difficult, or even wrapped around irregular shapes.
The MiniFlex
is lightweight. It does not use magnetic cores like standard
®
transformers. The transformation principle is based on an air core. It pres-
ents virtually no load to the system under test, has a low phase shift and
excellent frequency response, and cannot be damaged by overloads. The
sensor assembly is insulated for 1000V CAT III; 600V CAT IV. The Mini-
Flex
meets EN 61010 and is CE marked.
®
The MiniFlex
has an mV output proportional to the current measured
®
for direct readings on DMMs, data loggers, oscilloscopes, and power or
harmonic meters. TRMS measurements are taken when connected to a
TRMS meter. The MiniFlex
is insensitive to DC currents and only the AC
®
component of the measured signal is measured.
The flexible sensor is available in lengths of 6" and 10".
5
MiniFlex
Flexible AC Current Probe
®
DataLoggerStore
1.800.561.81
www.
.ca
Shop for Data Logging products online at:
Advertisement
Table of Contents
