Advertisement
NOTE: Do not allow anything but water to rest on the surface
of the ice. Items left on the surface of the rink will sink down
into the ice and create a dangerous and immovable obstacle.
Remove any leaves or other debris prior to use or resurfacing.
RESURFACING
Adding more water to the surface of your Ice Rink and allowing
it to freeze will refresh the ice surface. It is recommended that
you avoid resurfacing your ice until late in the afternoon or at
night after you are done skating for the day. For best results,
use very thin water layers to resurface your rink.
RAVE Sports recommends that you occasionally scrape the
surface of the ice with a plastic snow shovel (metal shovels do not
work as well) to remove snow, ice chips, and other items as
needed. Resurface immediately after scraping. Keeping your
surface clean and smooth will minimize accidents and increase
the enjoyment of the product.
Use caution when using shovels or skating near the perimeter
side tubes as they can easily be cut and damaged. Packing
snow over these tubes will help extend the life of the product.
REMOVING YOUR ICE RINK
This product is made for single season use. If perimeter side
tubes are undamaged, you can consider cleaning and storing
for next season.
Allow ice to thaw completely with spring thaws.
11
Advertisement
