Page 2
Alarming When the TempTale4 USB is exposed to a temperature outside a pre-programmed time and temperature limit threshold, an “Alarm Bell” icon will appear in the lower right corner of the display. Stopping a TempTale4 Monitor Press and hold (1 to 3 seconds) the Stop button until the “Stop” icon appears in the upper Managing and Viewing TempTale4 USB Monitor Files right corner of the display. Inserting the USB plug into a USB port on the computer will also • If the computer has Adobe PDF compatible reader software installed, the PDF report file stop the monitor. containing the monitor information, summary statistics, and time-temperature data graph, can be opened and viewed by double clicking on the .pdf file icon. Displayed Information • If the computer has Sensitech’s TempTale Manager Desktop Software installed, the .ttx ® Temperature Data data file containing the monitor information and time-temperature data, can be opened and accessed by double clicking on the .ttx file icon. • Both the PDF and .ttx files can be moved, copied, saved and/or attached to email as allowed Recording Stopped recording by the computer operating system. Limits exceeded Marked point...
Need help?
Do you have a question about the TempTale 4 and is the answer not in the manual?
Questions and answers
What caused access denied to the Temptale?