Table of Contents
Advertisement
Method B: IR Remote Control
1. In /Out Switch
Push the button on the checkerboard to select Input & Output port.
Ex: Select Input 2 to Output 3
Press output number key "3" to select Output 3
Press input number key "2" to select Input 2
Button
OFF
ON
STATUS
MUTE
SAVE
PRESET
DEFAULT EDID
LEARN EDID
CLEAR
TAKE
F1
F2*
Function
Standby mode
Power on the matrix switcher
Preset output status
Turn off output's video and audio
Save current mapping mode
Preset mapping mode
Begin default EDID selection
Begin EDID learning from one output
Clear the previous IR operation procedure
Trigger the previous setting
Change all output to one input
Fast switch to Video Wall 2x2 or Video Wall 1x1
8
Advertisement
Table of Contents
