Quick Selection: Get a quick setting from default
(a) Select the type of Rotation if requires ( Default is none)
1x3: This mode will split the screen into 3 parts and rotate the figure.
1x4: The mode will split the screen into 4 parts and rotate the figure.
*Notice that the Rotation and the split configuration cannot do simultaneously.
Video Wall setting
(a) Select the output port and resolution
(b) Select the part you want to show on display
User Set:
User can define how many cut in both direction (enter 1~4) and the part want to show on display.
Read the configuration of User Set, please click the
button.
11