Software Control through RS‐232 port / Ethernet port
System Requirement and Precautions
1. Whenever power off XTREME4MX, please stay unpowered at least 5 to 10 seconds to allow power capacitors to
discharge.
2. The XTREME4MX provides software control program which runs under Microsoft Windows 98, 2000, XP, 7
through the interface of RS‐232 serial control.
3. Before you click on the icon of the software, make sure you have secured the connection between your
computer COM port and the XTREME4MX.
Start the software control program
When clicking on the executable file, the following dialog will pop‐up. It has two ways to control the
XTREME4MX device (under Microsoft Windows 7, please run as administrator).
Step 1: Select RS‐232 or Ethernet connection.
Step 2: Select COM port connection.
System:
10