Table of Contents
Advertisement
4. Default EDID Mode
2) Push "input+ (default)"button to select the input channel which you want to learn default EDID and
then keep pushing "input+ (default)"button when you select your desired input channel
3) Push the "+"or "‐" output push button and then the LED will show "E""d" one time to enter Learn
Default EDID Mode
4) Use "+"or "‐" output push button to select the default EDID mode(1~8)
5) Release "input+ (default)"button after selecting the desired default EDID mode, and then the LED will
blink twice and the setting will be effective
6) It will quit the Learn Default EDID Mode if you push the "input‐ (learn)"button before the setting is
effective
7) The LED will show "0""0" if the setting is success
The LED will show "F""F" if the setting is failure
5. EDID Learning Mode
1) Push "input‐ (learn)"button to select the input channel which you want to learn EDID from HDMI
output and then keep pushing "input‐ (learn)"button when you select your desired input channel
2) Push the "+"or "‐" output push button and then the LED will show "E""L" one time to enter Learn
Output EDID Mode
3) Use "+"or "‐" output push button to select the output port number
4) Release "input‐ (learn)"button after selecting the desired output port number, and then the LED will
blink twice and the setting will be effective
5) It will quit the Learn Output EDID Mode if you push the "input+ (default)"button before the setting is
effective
6) The LED will show "0""0" if the setting is success
The LED will show "F""F" if the setting is failure
7
Advertisement
Table of Contents
