Finding A Contacts Entry - Samsung Delve SCH-R800 Series User Manual

Select the number you wish to store in your Contacts list.
4.
The associated Call Information screen appears in the
display.
Press the Add To Contacts soft key. The Add To Contacts
5.
screen appears in the display showing the following
options:
• Add New Contacts — Lets you create a new Contacts entry.
• Update Existing — Lets you add the selected number to an
existing Contacts entry.
For more information on saving the number, see "Saving a
Number from a Call" on page 38.

Finding a Contacts Entry

Voice Method
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
In standby mode, press the Voice Recognition key (
1.
"Say a Command" appears in the display and is
pronounced through the speaker.
Say "Lookup".
2.
VoiceSignal prompts you to "Say the name or #."
Speak clearly and say the full name of the person you want
3.
to call, exactly as it is entered in your contact list.
• If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with "Did you say?" followed by the first name on the list.
Say "Yes" to confirm the name or "No" to hear the next
4.
name, or use the keypad to select the correct name from
the list. (For more information, refer to "Confirmation" on
page 110.)
• To say the name again, press the Repeat soft key.
• To exit VoiceSignal without dialing, press
5. The contact information for the name you selected appears
in the display.
).
.
Understanding Your Contacts 40