Setting Up Your Voicemail - Samsung Delve SCH-R800 Series User Manual

Portable dual-band mobile phone
Hide thumbs Also See for Delve SCH-R800 Series:
Table of Contents

Advertisement

Turn Your Phone On
Press the LOCK key (
1.
the top of the phone.
Note: As with any other radio-transmitting
device, do not touch the antenna (at the
bottom of the phone) while using your
phone as this can affect call quality and
can cause the phone to operate at a
higher power level than is necessary.
The phone begins searching for a
2.
network signal.
3.
Once the phone finds a signal, the
No Service icon (
line of the display changes to a
Signal Strength icon [(
You're now ready to place and receive calls.
4.
Note: If you are outside of your carrier's coverage or roaming area, the No
Service icon (
) appears at the top of the phone's display. If you
cannot place or receive calls, try later when service is available, or at
another location.
Turn Your Phone Off
Press and hold the LOCK key (
7
Press
), on
) in the top
) or (
)].
), on the top of the
phone, for two or more seconds. Your phone powers off.
Note: If your phone is on and you press
phone will not power off. This prevents your phone from being turned
off accidentally.

Setting Up Your Voicemail

Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
In standby mode, press the Dialer soft key, then press and
1.
hold
or dial your own mobile number and press
to dial Voicemail. (For more information, refer to
"Making a Call — Number Entry Dialing" on page 20.)
Follow the prompts in the new user tutorial to setup your
2.
mail box.
Listen to Voicemail
In standby mode, press the Dialer soft key, then press and
1.
hold
or dial your own mobile number and press
to dial Voicemail. (For more information, refer to
for less than one second, the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents