Auto Retry - Samsung Delve SCH-R800 Series User Manual

Speed Dial
Speed Dial lets you disable the speed dialing function, except for
the Voicemail hot key (
information, refer to "Speed Dial Numbers" on page 44.)
From the Settings menu, select Call Settings
1.
• On — Enables the speed dial keys.
• Off — Disables the speed dial keys.
Select the desired setting and press the OK soft key to save
2.
your selection.

Auto Retry

Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
From the Settings menu, select Call Settings
1.
The following settings appear in the display:
• Off — Disables automatic re-dialing of numbers
• Every 10 Seconds — Phone automatically re-dials a number
every 10 seconds
• Every 30 Seconds — Phone automatically re-dials a number
every 30 seconds
• Every 60 Seconds — Phone automatically re-dials a number
every 60 seconds
137
) which remains active. (For more
➔
Speed Dial.
➔
Auto Retry.
Select the desired setting and press the OK soft key to save
2.
your selection.
TTY Mode
Your phone is fully compatible with TTY equipment used by those
who are hearing impaired. TTY equipment is connected to your
phone through the headset connector on the top of the phone.
TTY Mode must be enabled before you can use your phone with a
TTY device.
From the Settings menu, select Call Settings
1.
You are prompted to confirm you want to change the
current TTY Mode setting.
Note: The "Enabling TTY may Impair Headset Use and Non-TTY Accessory
Performance." message pops up when you select TTY Mode.
To access the TTY Mode settings, press the Yes soft key. To
2.
return to the Call Settings sub-menu, press the No soft key.
If you press the Yes soft key, the following settings appear
3.
in the display:
• TTY Full — Enables TTY mode and disables microphone and
earpiece.
• TTY+Talk (VCO) — Enables TTY mode and microphone.
• TTY+Hear (HCO) — Enables TTY mode and earpiece.
➔
TTY Mode.