Royal Sovereign FS-2D Owner's Manual page 8

PRODUCT OPERATION
8. When a tube in the front row is full, the machine will stop
sorting and the display will indicate which coin tube is
full by showing a blinking letter, either Q,N,P,D (quarter,
nickel, penny, dime).
9. When a coin tube is full, pull the tube tray, where the full
tube is located, forward. The machine will automatically
begin sorting again.
NOTE: The display will reset the number of coins for that
denomination. The total dollar amount will not reset and
will continue counting where it left off.
10. While the coins continue sorting, remove the full tube from
the tube tray. Pull out the full wrapper and replace with a
new coin wrapper.
11. When a coin tube in the back row is full, the machine will
stop sorting and the LCD Display will indicate which coin
tube is full by a blinking letter. When a tube in the back
row is full, remove it and replace with a new wrapper.
Push the tube tray all the way back and continue sorting.
12. To reset the display, press the "CLEAR" button. When you
are finished sorting, press the "RUN/STOP" button to stop
the machine and turn the power switch off.
7
(CONTINUED)