Product Operation - Royal Sovereign FS-2D Owner's Manual

PRODUCT OPERATION

1. Place the machine on a sturdy and level work surface.
2. Make sure coin rows are pushed back into place.
3. Place coin wrappers into the corresponding tubes. For
accurate coin sorting, it is important that the coin
wrappers be inserted all the way to the bottom of the
tubes and that they do not extend above the top edge of
the tube (you may operate the machine without coin
wrappers).
4. Turn the power switch on, located on the back side of the
machine.
5. When you are ready to start the coin counting process,
press the "RUN/STOP" button.
NOTE: You will hear a ticking sound. This is the Royal
Sovereign Patented Anti-Jam technology working to
ensure accurate counts and smooth operation.
6. Insert your loose change into the hopper. Coins will
automatically begin sorting into the first row.
NOTE: DO NOT insert any foreign objects including: $1
coins, non-US coins, damaged coins, clips, screws, paper,
glass, and pins.
WARNING: DO NOT PUT YOUR FINGERS INSIDE THE
OPENING.
7. As the machine is operating, you may insert more coins
into the hopper.
6