Danfoss BasicPlus2 User Manual

For floor heating

Download this manual

User Guide

BasicPlus

Room Thermostats for Floor Heating

www.heating.danfoss.com

Page 1 User Guide BasicPlus Room Thermostats for Floor Heating www.heating.danfoss.com...
Page 2: User Guide
(only for WT-P and WT-PR types) The Advanced Programmable Timer mode enables the setting of a timer-controlled program for automatic comfort temperature, and an energy-saving lower setback temperature if standard room comfort temperature is not required. VUCUA212 03/2015 Danfoss Floor Heating Hydronics...
Page 3 To exit WT-P/PR, press , which is available for this purpose (automatic exit after 30 seconds with no operation). To exit WT-D/DR, wait for automatic exit (30 seconds). The upper digits indicate the parameter number. VUCUA212 03/2015 Danfoss Floor Heating Hydronics...
Page 4: Error Messages
All relay output will be turned off in all cases. Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.