OREC LS360 Setup Instruction page 2

1) Open the box.
2) Check if following items are in bag.
1 x User Manual
1 x Engine Manual
1 x Machine Parts List
1 x double ended wrench 10x12mm
1 x double ended wrench 14x17mm
1 x double ended wrench 19x22mm
2 x wire band
1 x plug wrench
2 x Handle fix bolt M8*45
2 x flat washer 8
2 x spring washer 8
2 x mini cap nut M8
3) Loosen the knob bolts in the location
indicated with a picture.
4) Take the frame pipe on the loading
platform slipping the side panel, then, put
the panel back and fasten the knob bolt
again.
1