Download Print this page

Samsung CD Player User Manual page 9

Samsung cd player user manual
Hide thumbs

Advertisement

Setup
Connecting the power cable
The 4-pin power cable from the internal power unit of your computer must be connected to the power
terminal on the rear of the COMBO drive.
A - Cut Side
Note: An improperly connected power cable may cause trouble. Check the direction of the power connector
and the incline side of the COMBO drive before connecting.
Connecting the E-IDE cable
Insert the IDE cable (40-pin), which is connected to the hard disk to the interface terminal.
(Place the red line of the cable close to the Pin 1.)
When using one E-IDE cable
Connect the cable to the SL (Slave) of the Master/Slave Select Terminal at the rear of the COMBO drive.
a : Slave Drive (Choose the SL Jumper)
b : Hard Drive
c : MainBoard
When using two E-IDE cable
If there is only one COMBO drive, select MA (Master).
a : Master Drive (Choose the MA Jumper)
c : MainBoard
e : Secondly 1
1 +5V DC
2 Ground
3 Ground
4 +12V DC
b : Hard Drive
d : Primary 1
English - 10

Hide quick links:

Advertisement

loading

  Related Manuals for Samsung CD Player

This manual is also suitable for:

Sm-348b