Sony XDR-V20D Operating Instructions

DIGITAL RADIO DAB/FM
Operating Instructions
©2017 Sony Corporation Printed in China
XDR-V20D
Listening to the Radio
1 2
Turn on the unit. Select the "DAB" or "FM" function.
Press repeatedly.
After pressing FUNCTION once,
you can also select a function
by turning the TUNE dial and
pressing ENTER.
Presetting stations (5 DAB and 5 FM)
1 2
Tune to the station you Press and hold the desired preset button (1–5) until "Stored to [PRESET x]."
want to preset. appears on the display.
Follow the steps in "Listening to
Example: Presetting a tuned station to the preset button 3
the Radio" above.
To adjust the volume To improve DAB/FM radio reception
Tips
• The last set volume is stored in the unit's memory.
• VOL + on the unit has a tactile dot. Use the tactile dot as
a reference when operating the unit.
Listening to Music from an External Device
1
Connect the external device to the unit.
Stereo mini plug
2 rings
Portable digital
music player, etc.
Audio connection cable
without resistor (not
supplied)
To AUDIO IN
4-691-621-11(1)

Getting Started

1
Connect the unit to a wall outlet and charge
the unit.
The built-in battery will be fully charged ("
6 hours.
Wall outlet
AC adaptor
(supplied)
To DC IN
See "Setting Menu Options" for manual tuning.
When selecting the FM function for the first time
FM auto tune will start automatically when the FM function is
selected for the first time.
The unit automatically
switches to the
selected function
after about 2 seconds.
Tips
• Even if you select "Later" on the "Get FM station name" screen, FM station
names will be received and stored in the unit while you are listening to
broadcasts.
• FM station names may not be transmitted, depending on the station.
Tips
• If you try to store another station with the same preset
number, the previously stored station will be replaced.
• The preset stations remain in the unit's memory even after
an auto tune is performed.
• The preset button 3 on the unit has a tactile dot. Use the
tactile dot as a reference when operating the unit.
Note
When adjusting the antenna, be
sure to hold it by the bottom
part. The antenna may be
damaged if you move it with
excessive force while holding it
by the upper part.
2 3
Turn on the unit. Select the "AUDIO IN" function.
Press repeatedly.
After pressing FUNCTION once,
you can also select a function
by turning the TUNE dial and
pressing ENTER.
When using the unit for the first time, make sure to connect the unit to a wall outlet
using the AC adaptor (supplied). Otherwise, the unit will not turn on.
2 3
Extend the antenna. Turn on the unit.
") in up to
3
Select the desired station or service.
Listening to a preset station
1 2
Select the "DAB" or "FM" Select the desired preset station.
function.
Example: When the preset button 3 is pressed
Press repeatedly.
To make a new DAB/FM station list
If you have moved to another region, perform DAB and FM auto tunes again.
Select the "DAB" or "FM" function, then press AUTO TUNE.
Notes
• The currently stored station list will be cleared once the auto tune
process starts.
• When the setting menu is displayed, auto tune will not be
performed even if AUTO TUNE is pressed.
Note on FM auto tuning
Be sure to select "By station list" in "FM tune mode" before
starting FM auto tune. When "Manual tune" is selected, scan tuning will
start instead. See "Setting Menu Options" for details.
4
Start playback on the connected device.
The unit automatically
switches to the selected
function after about 2
seconds.
When turning on the unit for the first time
DAB auto tune will start automatically when the unit is turned on for the
first time. After DAB auto tune is completed, the unit receives the first
station in the DAB station list stored by DAB auto tune. If you want to
cancel DAB auto tune process, press BACK.
To cancel the auto
tune process while
in progress, press
BACK.
Tip
To perform auto tune again later, see "To make a new
DAB/FM station list" below.
Selected station
Station currently
being received
Secondary service (after the "L" mark)
Selected station
Station currently
being received
Scrolling text
Station name*
(RT: Radio Text of up to 64 characters)*
* Displayed only when RDS data has been received.
Note
To avoid changing the preset accidentally,
do not hold down the preset button.
The unit receives the first
station in the new station list.
To adjust the volume
Select the appropriate volume on the connected device
and then adjust it on the unit using VOL + or − buttons.
To turn off the unit
Setting the unit to standby mode
The unit switches to standby mode and the clock
appears on the display.
Turning off the power completely (Off mode)
Press and hold  for
about 2 seconds.
Power to the unit is shut off and the display goes
blank. Set the unit to off mode when you are not using
it to save power.
"SC" lights up when a secondary
service is received.
Scrolling text (DLS: Dynamic Label Segment
of up to 128 characters)
Station name*
About the FM auto tune process
You can cancel the FM auto tune process that starts
after the FM function is selected for the first time.
However, if you want to tune to stations by station list,
you will need to perform FM auto tune.
For details on how to perform FM auto tune later, see
"To make a new DAB/FM station list."
To cancel the auto
tune process while
in progress, press
BACK.
The unit receives the first
station in the new station list.