1. Manuals
  2. Brands
  3. Northern Manuals
  4. IP Camera
  5. IP4WVFD
  6. Installation & quick start manual

Northern IP4WVFD Installation & Quick Start Manual

4.0 megapixel ip outdoor motorized varifocal ir dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP4WVFD and is the answer not in the manual?

Questions and answers

Related Manuals for Northern IP4WVFD

Summary of Contents for Northern IP4WVFD

  • Page 2 Network Dome Camera·Quick Start Guide About this Manual The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
  • Page 3 Network Dome Camera·Quick Start Guide Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 4 Network Dome Camera·Quick Start Guide 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 5 Installation & Quick Setup Guide Warnings Follow these Cautions Follow these safeguards to prevent precautions to prevent serious injury or death. potential injury or material damage. Warnings ● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
  • Page 6 Network Dome Camera·Quick Start Guide ● If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. ● Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
  • Page 7 Network Dome Camera·Quick Start Guide ● Do not expose internal components to liquid or moisture. ● While in transit, the camera shall be packed in its original packing, or packing of the same protection. ● Improper use or replacement of the battery may result in hazard of explosion.

  • Page 8: Table Of Contents

    Network Dome Camera·Quick Start Guide Table of Contents 1 Appearance Description ..............8 2 Installation ..................11 2.1 Disassembling ............... 12 2.2 Mounting ..............12 2.2.1 Ceiling Mounting ..........12 2.2.2 Ceiling Mounting with Gang Box ......17 2.2.3 Wall Mounting ............ 20 2.3 Image and Focus Adjusting ..........

  • Page 9: Appearance Description

    Network Dome Camera·Quick Start Guide 1 Appearance Description The overview of the network dome camera is shown below. Figure 1-1 Overview...
  • Page 10 Network Dome Camera·Quick Start Guide Table 1-1 Overview Description Bubble Black Liner Lens Mounting Base Reset Auxiliary Video Output Serial Port Micro SD Card Slot Network Cable Power Cable Audio/Alarm Interface  Press RESET about 10s when the camera is powering on or rebooting to restore the default settings, including the user name, password, IP address, and port No., etc.
  • Page 11 Network Dome Camera·Quick Start Guide Alarm/Audio Cable Interface Figure 1-2 Audio and Alarm Interfaces...

  • Page 12: Installation

    Installation & Quick Setup Guide 2 Installation Before you start: ● Make sure the device in the package is in good condition and all the assembly parts are included. ● The standard power supply is 12V DC, please make sure your power supply matches with your camera. ●...

  • Page 13: Disassembling

    Network Dome Camera·Quick Start Guide 2.1 Disassembling Steps: 1. Loosen the three screws on the edge of the bubble with the screw driver. 2. Open the bubble and remove the inner black liner. Screw Hole Black Liner Bubble Figure 2-1 Remove the Bubble and Black Liner 2.2 Mounting 2.2.1 Ceiling Mounting Steps:...
  • Page 14 Network Dome Camera·Quick Start Guide 3. According to the drill template, drill three screw holes in the ceiling. Side Cable Outlet Cable Outlet Drilling Template for Outdoor Day/Night Vandal-proof Dome Camera Screw Hole Figure 2-2 The Drill Template 4. If you want to route the cables inside the ceiling, drill a cable hole in the ceiling according to the drill template.
  • Page 15 Network Dome Camera·Quick Start Guide Back Box Screw Figure 2-3 Secure the Camera 7. Route the cables through the cable hole. 8. Connect the video output connector to the monitor. Connect the power connector to the power supply. 9. Adjust the image and focus. Please refer to the section 2.3 for more detailed information.
  • Page 16 Network Dome Camera·Quick Start Guide Figure 2-4 Secure Black Liner and Bubble Conduit Installation on the Side If you want to route the cables from side of the camera, you need to follow the steps below to install a conduit for cable routing. Steps: 1.
  • Page 17 Network Dome Camera·Quick Start Guide 2. Route the power cable and network cable through the side outlet to the conduit. 3. Align and rotate clockwise the conduit to the side outlet tightly. Conduit Figure 2-6 Install the Conduit to the Camera For wall mounting, position the side outlet directly downward for water-proof.

  • Page 18: Ceiling Mounting With Gang Box

    Network Dome Camera·Quick Start Guide Downward Figure 2-7 Side Outlet Direction 2.2.2 Ceiling Mounting with Gang Box Steps: 1. Disassemble the camera. Refer to the section 2.1. 2. Install the gang box in the ceiling. 3. Attach the mounting base to the gang box with two screws.
  • Page 19 Network Dome Camera·Quick Start Guide Mounting Base Figure 2-8 In-ceiling Mount 4. Route the cables through the hole in the center of the mounting base. 5. Align the camera with the mounting base. 6. Tighten the screws to secure the camera with the mounting base. 7.
  • Page 20 Network Dome Camera·Quick Start Guide Figure 2-9 Secure Camera 9. Install the inner black liner back to the camera. 10. Align the bubble with the camera. 11. Tighten the screws to secure the bubble with the camera . Figure 2-10 Secure the Bubble...

  • Page 21: Wall Mounting

    Network Dome Camera·Quick Start Guide 2.2.3 Wall Mounting For the wall mounting, you have to purchase a wall mount. Steps: 1. Disassemble the camera. Refer to the section 2.1. 2. Install the wall mount and mounting adapter. 3. Align the screw holes of the mounting base with the corresponding screw holes of the mounting adapter.
  • Page 22 Network Dome Camera·Quick Start Guide 9. Adjust the image and focus. Please refer to the section 2.3 for more detailed information. Figure 2-12 Secure Camera 10. Install the inner black liner back to the camera. 11. Align the bubble with the camera. 12.

  • Page 23: Image And Focus Adjusting

    Network Dome Camera·Quick Start Guide 2.3 Image and Focus Adjusting Steps: 1. 3-axis adjustment. View the camera image using the monitor. Rotate the panning table to adjust the panning position of the camera. Rotate the tilting axes to adjust the tilting position of the camera.

  • Page 24: Installation Of Network Cable Water-Proof Jacket

    Network Dome Camera·Quick Start Guide Tighten the zoom lever. Loosen the focus lever and move the lever between F (Far) and N (Near) to obtain the optimum focus. Tighten the focus lever. Zoom/Focus Lever Figure 2-15 Lens Adjustment 2.4 Installation of Network Cable Water-proof Jacket Purpose: If the camera is installed outdoor, you can adapt the water-proof...
  • Page 25 Network Dome Camera·Quick Start Guide Figure 2-16 Water-proof Accessory Components Table 2-1 Components Components Camera’s Network Interface Socket O-Type Gasket Network Plug Waterproof Endcap Waterproof Rubber Gasket Lock Nut Network Cable from Router/Switch...
  • Page 26 Network Dome Camera·Quick Start Guide Align the snap and notch. i. Insert into ⑤ ④ ii. Secure with ⑥ ④ Camera Switch/Router Figure 2-17 Water-proof Accessory Installation Steps: 1. Feed the plugless network cable ⑦ through the lock nut ⑥, waterproof rubber gasket ⑤...
  • Page 27 Network Dome Camera·Quick Start Guide 2. Crimp an RJ-45 network plug ③onto the end of the cable, taking care to insert the twisted pairs of wires in correct order. 3. Place the O-type gasket ② onto the end of the camera’s network interface socket ①.

  • Page 28: Setting The Network Camera Over The Lan

    Network Dome Camera·Quick Start Guide 3 Setting the Network Camera over the Note: You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection.

  • Page 29: Activating The Camera

    Network Dome Camera·Quick Start Guide 3.2 Activating the Camera You are required to activate the camera first by setting a strong password for it before you can use the camera. Activation via Web Browser, Activation via SADP, and Activation via Client Software are all supported.

  • Page 30: Activation Via Sadp Software

    Network Dome Camera·Quick Start Guide Figure 3-3 Activation Interface(Web) 3. Create a password and input the password into the password field. STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 31 Network Dome Camera·Quick Start Guide Get the SADP software from the supplied disk or the official website, and install the SADP according to the prompts. Follow the steps to activate the camera, please refer to the User Manual of Network Camera for other two activation methods.

  • Page 32: Modifying The Ip Address

    Network Dome Camera·Quick Start Guide STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 33 Network Dome Camera·Quick Start Guide Note: Please refer to Chapter 3.2 to activate the camera if the camera is inactive. 3. Change the device IP address to the same subnet with your computer by either modifying the IP address manually or checking the checkbox of Enable DHCP.

  • Page 34: Accessing Via Web Browser

    Network Dome Camera·Quick Start Guide 4 Accessing via Web Browser System Requirement: Operating System: Microsoft Windows XP SP1 and above version CPU: 2.0 GHz or higher RAM: 1G or higher Display: 1024×768 resolution or higher Web Browser: Internet Explorer 8.0 and above version, Apple Safari 5.0.2 and above version, Mozilla Firefox 5.0 and above version and Google Chrome 18 and above version Steps:...
  • Page 35 Network Dome Camera·Quick Start Guide Click Login. Figure 4-1 Login Interface 5. Install the plug-in before viewing the live video and managing the camera. Please follow the installation prompts to install the plug-in. You may have to close the web browser to finish the installation of the plug-in.
  • Page 36 Network Dome Camera·Quick Start Guide Figure 4-2 Download Plug-in Figure 4-3 Install Plug-in (1)
  • Page 37 Network Dome Camera·Quick Start Guide Figure 4-4 Install Plug-in (2) 6. Reopen the web browser after the installation of the plug-in and repeat steps 2~4 to login. For detailed instructions of further configuration, please refer to the user manual of network camera.

Table of Contents