Controls And Functions - Black & Decker PIUSB2B Instruction Manual

• Do not use this unit on a watercraft. It is not qualified
for marine applications.
• Check the unit periodically for wear and tear. Return
to manufacturer for replacement of worn or defective
parts immediately.
• Install and operate only as described in this Instruction
Manual.
Read And Understand this Instruction Manual
•
Before Using this Unit.
SAvE thESE inStRuctionS
INtrOduCtION
Congratulations on purchasing your new
Decker USB Personal Electronics Charger
this Instruction Manual and follow the instructions
carefully before using this unit.
PIUSB2B_ManualENFRSP_050813.indd 6-7
Black &
Read
.
6

CONtrOlS ANd FuNCtIONS

USB CHARGING PoRtS
PoWER/FAULt
LED INDICAtoR
HOW tHIS CHArGEr WOrKS
Your USB charger is designed to convert 12 Vdc to 5
Vdc. It allows the 12 Vdc in an automobile to supply
5 Vdc power to operate equipment that is normally
supplied from a USB power source. The charging cable
specifically designed for the electronic device being
charged is required. May not work for all electronic
devices. This product is intended for consumer use only.
12 VoLt DC
ACCESSoRY
PLUG
7
5/14/2013 4:17:06 PM