View Network Settings; Set Front Display Preferences - Control 4 C4-16S2-E-B Installation And User Manual

View Network Settings

To view network settings:
1.
2.
3.

Set Front Display Preferences

To set your viewing preferences for the front display:
1.
2.
Press Network.
From the Network Configuration screen, select
Ethernet or Zigbee.
To return to the Network Configuration screen, press
Back.
On the Output to Input screen, press the
button. The Display Configuration screen displays.
Use the buttons and/or the Select Dial to choose a
setting to change: Once you press the Select button
(or press the dial), you enter Edit mode.
In Edit mode, use the buttons or Select Dial to
change the highlighted setting then press the
button (or press the dial) to save the change and exit.
Brightness: Supported range: 0 to 100
Contrast: Supported range: 0 to 100
Backlight Timeout: Supported settings are:
OFF (always off)
1 to 90 seconds (default is 30 seconds)
ON (always on)
Reset Defaults: Restores factory defaults.
Display
OK
23