Network Configuration - Control 4 C4-16S2-E-B Installation And User Manual

Network Configuration

To set the network configuration:
1.
2.
IMPORTANT! When making logical connections in
Composer, identify the device as the network type
(Ethernet or Zigbee) that you choose on the device
network configuration. To avoid unexpected
behavior, do not identify the device as both network
types.
3.
4.
At the In to Out Assignments screen, press the
Network button.
On the Network Configuration screen, choose an
Ethernet or ZigBee network by rotating and pressing
the Select Dial.
If the switch is set to use a ZigBee network, the EUID,
Gateway, and ZigBee channel number are displayed.
This screen has two menu options:
Identify: When identifying the switch in
Composer, press this button.
Back: Returns to the Network Configuration
screen.
If the switch is set to use an Ethernet network, the
MAC address, method of obtaining a network IP
address, the device's IP address, Subnet Mask, and
Gateway are displayed.
15