Check Signal Status - Control 4 C4-16S2-E-B Installation And User Manual

2.
3.
4.
5.

Check Signal Status

1.
2.
22
Gain:
+4 dB (default: 0 dB)
Treble:
(default: 0 dB)
Bass:
(default: 0 dB)
Balance:
(default: 0 dB)
1c.
To toggle to view input signal sensing
information, press the Inputs button.
1d.
To exit the screen, press the
Rotate the Select Dial to highlight a setting.
Press the Select Dial to enter edit mode.
Rotate the dial to change the setting; then press the
dial to Save the new setting and exit edit mode or, to
exit without saving, use the Cancel button.
Press the Inputs button to go to the Input Signal
Sensing screen, or press the Exit button to return to
the Output to Input screen.
From the Output to Input screen, press the
button, then press the
Input Signal Sensing screen.
On the Input Signal Sensing screen, a shaded circle
appears by the device connection number of any
input device with a signal present.
Supported range: Mute and -44 to
Supported range: -12 to +12 dB
Supported range: -12 to +12 dB
Supported range: -50 to +50dB
Inputs
button to access the
Exit
button.
Setup