Samsung VP-M102 Owner's Instruction Manual page 52

Hi Speed USB is not guaranteed except for Microsoft(Windows) or Apple(Mac OS X) or supplied Driver.
Windows 98SE/ME: Full Speed USB
Windows 2000: Over Service Pack 4 - Hi Speed USB
Minimum Recommended
CPU Pentium III, 600MHz Pentium 4, 2GHz
OS Windows 98SE/ME Windows 2000/XP
Memory 128MB 512MB or above
200MB(For applications only.
Free space
Apart from this,
2GB or above
on the hard disk
1GB or more free space
800x600 dots 1024x768 dots
Display Resolution
16-bit colour
USB
USB 1.1 USB 2.0 High Speed
Notes
Not all PCs configured with the above environment are guaranteed to operate properly.
PCs used via a USB hub or with a USB card are out of the scope of guarantee.
If your OS is Windows 2000/XP, log in as the [Administrator(administrator of the PC)] (or a user with the equivalent privileges) to
install the OS.
If the capacity of PC is low, the video file may not be played normally or the file is often stopped.
If the capacity of PC is low, it may take long time to edit the video file.
Windows XP: Over Service Pack 1 - Hi Speed USB
Mac OS X: Over 10.3. - Hi Speed USB
Minimum Recommended
G3 500MHz
Mac OS 10.2
128MHz 512MB or above
200MB(For applications only.
Apart from this,
1GB or more free space
800x600 dots
16-bit colour
24-bit colour
USB 1.1 USB 2.0 High Speed
You can use this the CAM as a PC camera for video chatting, video conference and other PC camera applications.
1. Connect the CAM to the PC with the USB cable.
2. Move [Mode Selector] down to turn on the CAM.
USB mode screen appears automatically.
G4 Processor
3. Move the [
Mac OS 10.3
2GB or above
1024x768 dots
24-bit colour
Notes
This function requires the specified USB Streaming Driver and Software to be installed. Refer to page 112 for further details.
The CAM can be used as a PC Camera for programs such as Windows Messenger. The use of the PC Cam varies depending on the
Software. Refer to the documentation of the respective software products.
PC-Cam function is operated as 'Full Speed' in the capacity of Windows ME or over.
/ ] switch to select <PC-Cam> and press the [OK] button.
2
3