Samsung VP-M102 Owner's Instruction Manual page 33

The Electrical Image Stabilizer is a function that compensates for hand shake and other movements while taking pictures.
Refer to page 46 for further details.
1. Move [Mode Selector] down to turn on the CAM and move it down again.
The Mode Selection screen appears.
2. Move the [ / ] switch to select Photo mode and press the [OK] button.
The Photo Capture screen appears.
3. Press the [Menu] button and move the [
Press the [OK] button after selecting <Settings>.
4. Move the [ / ] switch to select <EIS> and press the [OK] button.
On( ): Set the EIS function.
Off: Cancel the EIS function.
5. Move the [ / ] switch to select desired setting and press the [OK] button.
6. Press the [Menu] button to finish setting.
The icon of selected function is displayed.
Notes
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
3
/ ] switch.
4
5
6
The colour balance may vary depending on the lighting conditions.
The White Balance is used to preserve natural colours under different lighting conditions.
1. Move [Mode Selector] down to turn on the CAM and move it down again.
The Mode Selection screen appears.
2. Move the [ / ] switch to select Photo mode and press the [OK] button.
The Photo Capture screen appears.
3. Press the [Menu] button and move the [
Press the [OK] button after selecting <Settings>.
4. Move the [ / ] switch to select <White Balance> and press the [OK] button.
Auto: Adjust the colour depending on the condition automatically.
Hold( ): Record with first selected colour without adjusting colour.
Outdoor( ): Record with the balanced light. (Natural light)
Indoor( ): Record with the balanced light. (Glow lamp, light in the studio or video light)
5. Move the [ / ] switch to select desired setting and press the [OK] button.
6. Press the [Menu] button to finish setting.
The icon of selected function is displayed.
If you select <Auto>, no icon is displayed.
Notes
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Photo View, you can move to <File Options> directly.
3
/ ] switch.
4
5
6