Samsung VP-M102 Owner's Instruction Manual page 24

You can set the focus depending on the subject or the environment. In most situations,
you can record best using AF(Auto Focus).
1. Move [Mode Selector] down to turn on the CAM.
The Video Record screen appears.
You can select Video mode or Previous mode as the start-up mode in System Settings.
(Refer to page 94)
2. Press the [Menu] button and move the [
Press the [OK] button after selecting <Settings>.
3. Move the [ / ] switch to select <Focus> and press the [OK] button.
AF: Set the focus automatically. When the CAM turns on, AF is selected in default.
MF( ): Set the focus manually.
4. Move the [ / ] switch to select desired setting and press the [OK] button.
5. Press the [Menu] button to finish setting.
The icon of selected function is displayed.
If you select the AF, any icon is not displayed.
+ / -
Adjust the focus using [ ] [ ] button to zoom in or out manually.
When a picture contains objects that are both close and far away from the CAM.
When a person is enveloped in fog or surrounded by snow.
Notes
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Video Record, you can move to <Settings> directly.
2
/ ] switch.
3
4
5
The Electrical Image Stabilizer is a function that compensates for hand shake and other movements while recording.
EIS provides more stable video when:
Recording with zooming
Recording small objects
Recording while walking or moving
Recording through the window in the car
1. Move [Mode Selector] down to turn on the CAM.
The Video Record screen appears.
You can select Video mode or Previous mode as the start-up mode in System
Settings. (Refer to page 94)
2. Press the [Menu] button and move the [
Press the [OK] button after selecting <Settings>.
3. Move the [ / ] switch to select <EIS> and press the [OK] button.
On( ): Set the EIS function.
Off: Cancel the EIS function.
4. Move the [ / ] switch to select desired setting and press the [OK] button.
5. Press the [Menu] button to finish setting.
The icon of selected function is displayed.
Notes
If you select <Back> in the menu, the previous menu appears.
Press and hold the [Menu] button in Video Record, you can move to <Settings> directly.
2
3
/ ] switch.
4
5