OPCOM Farm GrowWall2G Quick Manual page 2

D. Seedling
Status 0.0-0.5 0.5-1.0
NT-Adjuster (Add 2pcs) (Add 1pcs)
4.0-4.5 4.5-5.0 5.0-5.5
Satus
(Add 3pcs) (Add 2pcs) (Add 1pcs)
pH+ Adjuster
pH- Adjuster
D3. Growing Stage
1. When young plants grow to 3-4 inches height, switch control box to growing mode.
Please refer to chart II
2. After 4-6 weeks, harvest the larger plants for consumption and keep smaller plants growing.
3. For time saving, sow the new seeds in sprout tray one week before you start next planting process
E. Sprouts and Microgreens.
1. Before you start next seedling, take advantage of the seedling tray for sprouts and microgreens it takes 7-10 days to harvest.
2. Put seeds in warm water(recommeded temperature is 35
3. Cover the sponges with wet paper towels.
4. Place the seedling tray with cover in the shade or cover it with black cloth.
5. After germination, during the growing stage, keep green sprout under the light and white sprout in the shade or cover it
with black cloth; Around 7-10 days, you can harvest.
Day 0
F. Maintenance
F1. Add Water
1. Measure the PH/EC value every 1-2 weeks and add water to maintain the vlaue balance
F2. Change Water
1. After a cycle of planting, change the water and clean the unit
2 When change water, clean water gateway on each planting layers, you may also add moss detergent in the water tank to avoid the moss remaining
3. On the regular basis of every 1-2 weeks, clean the filtering sponge in the pump
F3. EC / pH Meter Use and Calibration
1. Keep the electrode clean of EC/pH meter and cover the electrode protective cap when not in use.
2. Turn off the meter when not in use for an extended amount of time.
G. Troubleshooting
Checkpoints / Solution
Issue
Make sure all power cables are connected.
Power button is ON.
Lamps not
lighting up Make sure LED status is ON
If it is on HI or LOW mode, the lamp has off time, during 24-hour cycle.
The lamp/ pump Control Box is designed with Auto, HI and LOW modes, which turn the lamps and the pump on and off
stop after hours periodically. It simulates an outdoor daily cycle to offer the best growing condition
Rotate the ring at the end of the pump clockwise or counterclockwise to get the most suitable water flow
Make sure it is not clogged at the water flowing gateway on each planting layer
Water Over flows
H. Q&A
Answer
Question
Product leakage When it works.
During the delivery in vessels, aircraft, or other vehicles, it may lead to damages in GrowWall(OFG003)/GrowWall2(OFG003-2)
and creates leaking problem. OPCOM FARM provides waterproof tape for you fix it in case damage happened.
For more information, please visit
www.opcomfarm.com
Plant Size
Sponge Number
Planting number
How to Set up
1.0-1.5 over 2.0
Standard range Add water
Plant Size
Sponge Number
5.5-6.5 6.5-7.0 7.0-7.5
Planting number
Standard range
How to Set up
Standard range 1pcs 2pcs
4-6 weeks
, not over 40 ) for 24 hours.
Day 1 Day 7-10
Green sprout White sprout
PATENT
CM
C US
Intertek
4010499
GrowWall2G
Small
70
48 (70%)
x 3 Layer
Medium-Large
40
24 (70%)
x 3 Layer
1 week
Harvest
Keep
Cut off Large leaf for regrow
Ver.: 180321
Wall Garden
Quick Guide Manual
Garden Version