Wireless Dmx Control - Acclaim Lighting Dyna Drum HO User Manual

WIRELESS DMX CONTROL

The embedded Aria™ wireless system allows you to control any number of Dyna Drum HO
fixtures that are within range of an Aria transmitter set to use the same wireless channel:
Tx
DMX IN
Wireless Chan: 2
DMX Addr: 100
USING A DYNA DRUM HO AS A WIRELESS HUB
When a Dyna Drum HO fixture receives a wireless input (and it has no wired DMX input
signal), it will automatically output the full received DMX universe on its output wires. This
means that you can wire through and control up to 32 non-Aria DMX fixtures (such as Dyna
Flood DMX), or more, if an active repeater is used.
Tx
DMX IN
Wireless Chan: 2
DMX Addr: 100
10
Optional Aria
transmitter
Wireless Chan: 2
DMX Addr: 104
DMX Addr: 104
Non-Aria equipped fixtures (e.g. Dyna Flood QA/QW)
Notes:
The wireless DMX channel is totally
independent of the DMX address.
To aid clarity, the necessary power
cables for each fixture are not
shown in these diagrams.
Wireless Chan: 2
DMX Addr: 108
See "Configuring Aria wireless DMX" on
page 17 for details about configuring
the wireless channel.
DMX Addr: 108