Acclaim Lighting Dyna Drum HO User Manual page 24

SETTING THE AUTOMATION FEATURES (PHOTOCELL) VIA RDM
The fixture includes two related features that allow you to automate standalone operation:
• The in-built photocell can enable fixture output (at 100%) when the ambient light level
falls below a pre-determined level.
• The auto shutoff timer determines how long the fixture should remain outputting after it
has been triggered by the photocell.
These automated features operate only in standalone mode, i.e. with no external DMX
control input.
TO SET THE AUTOMATION FEATURES USING THE XMT-350
1 Connect the XMT-350 to the DMX input line of the Dyna Drum HO installation.
2 On the XMT-350, press the
RDM function and press the
and after a short while the XMT-350 will display a list of all located fixtures. The fixture
highlighted in the list should show output from its emitters to identify itself.
3 If necessary, use the up/down buttons to highlight an alternative fixture.
4 Press the button to view details for the chosen fixture and then use the down button
to highlight the
DYNA DRUM HO WHITE 3000K
LABEL: DYNA DRUM HO WHITE ...
MODEL: DYNA DRUM HO WHITE ...
MAN: ACCLAIM LIGHTING
DMX START ADDRESS:
DMX PERSONALITY: MODE1: 1-SL...
DMX SLOTS:
5 Press the button to view the options:
DYNA DRUM HO WHITE 3000K
WIRELESS ON/OFF
WIRELESS CHAN
PHOTO SENS. ON/OFF
PHOTO SENS. VALUE
LED ON TIME ON LIGHT
6 Use the lower three options to set your parameters:
• PHOTO SENS. ON/OFF - enables/disables the photocell system.
• PHOTO SENS. VALUE - determines the required ambient light level at which the fixture
should begin outputting (100 is the most sensitive to light). Some experimentation will
be required to determine the optimum setting (the default is 70).
• LED ON TIME ON LIGHT - determines the number of hours (starting from the photocell
trigger) that light output should continue before being extinguished. The options
range from 1 to 24 hours (the default is 10 hours).
7 Press the button to return to the previous screen.
Note: For the photocell feature to operate, ensure that no DMX signal is received by the fixture.
Color models will output all colors at 100% when triggered.
22
MODE button, then use the arrow buttons to highlight the
button to select. The XMT-350 will search for RDM devices
MODEL entry:
001
1
ON
0
ON
70
10