Installation; Mounting The Unit - Acclaim Lighting Dyna Drum HO User Manual

INSTALLATION

MOUNTING THE UNIT

Each Dyna Drum HO fixture includes a sturdy yoke mount with multiple holes in its base
for various fixing options. Dyna Drum HO fixtures weigh 30lbs (13.6Kg) - ensure that the
mounting surface and the fixings used are sufficiently rated for the task (including wind
shear forces).
IMPORTANT: When mounting a Dyna
Drum HO fixture off ground, ensure
that a safety wire (with a SWL rating
of at least 30lbs (13.6Kg)) links the
anchor hole at the rear of the Dyna
Drum HO with a suitably sturdy
secondary fixing point.
The yoke adjusters on each side of the
Dyna Drum HO require a 5/16" (8mm)
hex key to focus the fixture.
A useful angle chart is provided on each
side to assist with initial adjustment.
When installing each Dyna Drum HO fixture, ensure that the surface
is level and that nothing is protruding to damage the mounting
yoke. The yoke has multiple mounting holes and is designed to
be surface mounted. Approved mounting surfaces include steel,
aluminum, concrete or wood structures. Bolts or screws (not
supplied) should be suitable for the surface (and the weight of the
fixture) and ensure a secure mount for the fixture.
4
Use a 5/16" or
8mm hex key
Safety wire
anchor hole
Angle chart