CAMDEN CV-110SPK Installation Instructions Manual page 6

To add a card and PIN user in card and PIN mode ( 3 1 # )
To Add a card and Pin user
(The PIN is any four digits between 0000 & 9999
with the exception of 1234 which is reserved.)
To change a PIN in card and PIN mode (Method 1)
Note that this is done outside the programming mode
so the user can do this themselves
To change a PIN in card and PIN mode (Method 2)
Note that this is done outside the programming mode
so the user can do this themselves
To delete a Card and PIN user just delete the card
To add a card user in card mode ( 3 0 # )
To Add and Delete a card user
To delete All users
To delete ALL users. Note: This removes all user
codes.
To unlock the door
For a PIN user
For a card User
For a card and PIN user
Standalone Keypad/Prox Access Control
Add the card as if for a card user. See page 5
Press * to exit from the programming mode
Then allocate the card a PIN as follows:
* Read card 1234 # PIN # PIN #
* Read Card Old PIN # New PIN #
New PIN #
* ID number #
New PIN #
2 User ID #
The operating is the same as adding and deleting
cards in mode 3
2 0000 #
Enter the PIN then press #
Read card
Read card then enter PIN #
Page 6 of 8
Old PIN # New PIN #
2 #