Quick Reference Programming Guide; Specifications - CAMDEN CV-110SPK Installation Instructions Manual

4. Quick Reference Programming Guide

To enter programming mode
To exit from the programming mode
Note: You must be in programming mode to program the following feature.
To change the master code
To add a PIN user
To add a card user
To delete a PIN or a card user
To unlock the door for a PIN user
To unlock the door for a card user

5. Specifications

Operating Voltage
User Capacity
Card Reading Distance
Active Current
Idle Current
Lock Output Load
Alarm Output Load
Operating Temperature
Operating Humidity
Waterproof
Adjustable Door Relay time
Adjustable Alarm Time
Wiegand Interface
Wiring Connections
Dimensions
Standalone Keypad/Prox Access Control
*
999999 is the default factory master code
*
0
The master code can be 6 to 8 digits
1
The ID number is any number between 1 & 2000. The
PIN is any four digits between 0000 & 9999 with the
exception of 1234 which is reserved. Users can be
added continuously without exiting programming mode.
1
Cards can be added continuously without exiting
programming mode
2
2
Users can be deleted continuously without exiting
programming mode.
Enter the
Present the card
12V DC ±10%
2,000
1.25" to 2.4" (3 cm to 6 cm)
< 60mA
25±5 mA
Max 3A
Max 20mA
-49°F to 140°F (-45°C to 60°C)
10% - 90% RH
Conforms to IP 68
0 - 99 seconds
0 - 3 minutes
Wiegand 26 bit
Electric Lock, Exit Button, External Alarm, External Reader
5 15/16" H x 1 3/4" W x 1" D (150 mm x 44 mm x 25 mm)
Page 2 of 8
Master Code #
New Code # New Code
User ID Number # PIN
Read Card #
User ID Number # for a PIN user or
Read Card # for a card user
PIN then press #
#
#