recording options
Wind Cut
You can reduce wind noise when recording sound from the built-in microphone.
If "Wind Cut : On" is set, the low-frequency components in the sound picked up by the microphone will be cut off
during recording: This makes it easier to hear voice and sound during playback.
•
Use the Wind Cut when recording in windy places such as a beach.
item
"Off"
Disables the function
"On"
Minimizes wind noise or other noise while recording.
•
Make sure the "Wind Cut" is set to "Off" when you want the microphone to be sensitive as possible.
The Wind Cut function works only with the built-in microphone.
•
The Wind Cut function can not use while EASY Q is in use.
•
This function works only Movie Record mode. Before selecting a menu item, set the mode to Movie Record
•
fi rst. ➥page 22
Quick View
The Quick View function is used if you want to preview the last recorded image.
• Press the Control button (
View mode.
-. Video mode:Then you can press the Control button (
or delete the current video.
During Quick view, press and hold the Control button (
or to the left (
) for reverse search.Pressing the Control button (
increases the search speed for each direction.
- RPS (Reverse Playback Search) rate: x2
- FPS (Forward Playback Search) rate: x2
To resume STBY mode, press the OK button.
-.
Photo mode: Then you can press the Control button (
The Quick View only can be set in the shortcut menu. ➥page 35
•
contents
) to select "Quick View".and switch to image Quick
) or (
x4
x8
x16
x4
x8
x16
) to delete the current image.
) to switch to pause
) for forward search,
/
) to repeatedly
on-screen
display
None
99999
99999
English_67