settings options
Date/Time Set
Set the current date and time so that the date and time at which you make a recording can be recorded correctly. ➥page 36
Date Type
You can select the date format to display.
settings
"2009/01/01" The date is displayed in the order of year / month / date.
"01/JAN/2009" The date is displayed in the order of date / month / year.
"JAN/01/2009" The date is displayed in the order of month / date / year.
The date is displayed in the order of date / month / year.
"01/01/2009"
Time Type
You can select the time format to display.
settings
The time is displayed as the unit of 12 hours.
"12 Hr"
The time is displayed as the unit of 24 hours.
"24 Hr"
Date/Time Display
You can set to display date and time on the LCD monitor.
Before you use the "Date/Time" function, you must set the "Date/Time Set". ➥page 36
•
settings
The date and time are not displayed.
"Off"
The date is displayed.
"Date"
The time is displayed.
"Time"
"Date & Time" The date and time are displayed.
The date/time will be read "JAN/01/ 2009 12:00 AM " in the following conditions:
•
- The movie (or photo) recording was made before setting the date/time in the memory camcorder.
- The built-in rechargeable battery becomes weak or dead.
This function depends on "Date Format" setting.
•
contents
contents
contents
on-screen display
-
-
-
-
on-screen display
-
-
on-screen display
None
JAN/01/ 2009
12:00 AM
JAN/01/ 2009 12:00 AM
English_86