Progression Fitness 700 R Owner's Operating Manual page 4

D
B
POLYFOAM(1)
E
POLYFOAM(1)
POLYFOAM(2)
HOW TO REMOVE THE POLY-FOAM
Open the box to see the rower as shown
in figure 1. Take out all the components
except the machine, and then remove the
poly-foam and remaining components from
inside. Please put the components aside for
later use.
Put the poly-foam back to it's original position,
then turn the whole unit 90 degrees (as shown).
HOW TO ASSEMBLE THE FRONT STABILIZER
Fit the front stabilizer (B) on to the main frame and
tighten it with screws (J1) and washers (J2). After
fitting the front stabilizer, by 2 people turn the
machine in to the direction as shown of figure 3 .
A
J2
J1
- 3 -
USE TOOL