Camera Id - Samsung SHC-750 User Manual

Instruction: Camera Operation
SETUP
Use the Up/Down buttons to

CAMERA ID

select an item.
BACKLIGHT
WHITE BAL.
MOTION DET.
LENS
SHUTTER
AGC
SENS-UP
SSNR
SPECIAL
EXIT
3. Use the Left/Right buttons to change the current value.
• Pressing the Left/Right buttons will display all possible values or modes in order.
Keep pressing the button until the desired value or mode is displayed.
4. Select Exit and then press the Set button to exit.
Caution
• The " " sign indicates that there is a further menu within the current mode;
press the Set button to move to the menu following.
• The "- - - " sign indicates that the current mode cannot be used.
Camera ID
If an ID is assigned to a camera, it can be displayed on a monitor and that camera's
communication mode can be changed when communicating with external devices.
1. After the Setup menu is displayed on the monitor, press the Up/Down button to move the
arrow until it is pointing to "Camera ID."
2. Press the Left/Right button until the current status changes to "ON."
COLOR CCD CAMERA 22
OFF Use the Left/Right buttons to
change the item value.
OFF
ATW
OFF
DC
MANUAL
HIGH
OFF
MIDDLE
User's Manual
Caution
• If the current status is "OFF," the camera ID will not
be displayed on a monitor even if an ID is assigned.
3. Press the Set button.
4. A number from 0~255 may be assigned as a
camera ID.
Move the ID number cursor left/right to select and
assign an ID.
5. Once the ID is assigned, select a position for ID
display.
Press the Set button from the Position menu.
COLOR CCD CAMERA
SETUP
CAMERA ID OFF
BACKLIGHT OFF
WHITE BAL. ATW
MOTION DET. OFF
LENS DC
SHUTTER MANUAL
AGC HIGH
SENS-UP OFF
SSNR MIDDLE
SPECIAL
EXIT
23 User's Manual